Willkommen bei WOAN
Angebot →
Sprache
Sprache
WhatsAppAngebot
DIRECT ANSWER

Direct conclusion

Set height and security level by application, match opening and wire diameter to climbing and impact risks, then confirm edges, posts and foundations.

Bring the application, site conditions and delivery requirements into the decision so the quotation can be built around a real project.

READING NOTES

01

Posts and foundations first

Legen Sie das Pfostensystem vor der Farbe fest. Querschnitt, Wanddicke, Einbindetiefe, Fundamentgröße und Abstand wirken gemeinsam auf die Stabilität bei Wind, Kontakt und langfristiger Nutzung.

02

Corners, slopes and gates

Gerade Abschnitte können regelmäßig angeordnet werden. Ecken, Enden, Tore, Gefälle und Höhensprünge benötigen eine eigene Betrachtung. Eck- und Endpfosten dürfen nicht ungeprüft die Ausführung der Zwischenpfosten übernehmen. Entscheiden Sie auf geneigtem Gelände zwischen dem Gefälle folgenden Feldern und abgestufter Montage.

DECISION TABLE

Confirm the parameters against the project

Start with the application, then carry the required checks into the enquiry.Swipe horizontally on mobile to view the full table
ApplicationMaschenweite (mm)Wire (mm)Anti-climbImpact resistanceVisibilityNotes
Factories and warehouses50×502.5–3.0MediumMediumHighEconomical
Schools and sports fields50×503.0–3.5Medium-highMedium-highHighSafety and visibility
Substations and chemical sites50×50 / 40×403.5–4.0HighHighMediumUse anti-climb top
Roadsides and slopes60×602.5–3.0MediumMediumHighWind load priority
Typical reference combinations only; verify finished wire, wind load, service life and foundations before quotation.
03

Panel and fixing fit

Feldhöhe, Sicken, Rahmen und Befestigungen müssen zu den Pfosten passen. Bei Betonfundamenten sind Bodenverhältnisse und Montageverfahren anzugeben, damit Pfostenlänge und Fundamenttiefe zusammenpassen.

Concrete footing C20
H Fence heightL Post spacingh EmbedmentB Footing width
04

Fence project enquiry

Eine brauchbare Anfrage enthält Gesamtlänge, Höhe, Verlaufsskizze, Pfostenabstände, Torpositionen, Oberfläche sowie Fotos oder Zeichnungen. Dadurch können Felder, Pfosten und Zubehör als abgestimmtes System geprüft werden.

QUOTE CHECKLIST

Prepare for a quote

  • Application and security level
  • Total run and segments
  • Fence height and embedment
  • Mesh opening
  • Wire and selvage diameter
  • Edge and anti-climb treatment
  • Post section and spacing
  • Foundation and embedment
  • Oberfläche
  • Environment and service life

Fragen

What should be confirmed before ordering?

Why define the post system first?

Post section, embedment, foundation and spacing determine stability; the panel cannot be selected in isolation.

What should be supplied for slopes and corners?

Share the line, slope, gates and level changes, and state whether panels follow the slope or step between sections.

Should fixings be included in the quote?

For a complete fence system, confirm fixings, gate openings and top treatment in the same brief.

Ähnliche Produkte

View products for this guide

ZaungitterReview fence panels and system options→

KEEP READING

Passende Artikel

ProjekteinsatzGartenrahmenzaun: grüne Matten und Rundpfosten abstimmenGitter, Kappen und Schrauben als Baugruppe prüfen.→ProjekteinsatzZauntore und Ecken richtig abstimmenÜbergänge getrennt von geraden Zaunfeldern erfassen.→EinkaufsratgeberZaunstückliste: Pfosten, Tore und Verbinder mit erfassenMengen aus tatsächlichen Abschnitten und Anschlüssen ableiten.→