WhatsAppRequest a quote
WOAN金網へようこそ

建設用溶接金網 / PRODUCT DETAIL

溶接金網

Flat, firmly welded mesh for farming, separation and construction applications.

建設用溶接金網 / PRODUCT DETAIL

溶接金網

Flat, firmly welded mesh for farming, separation and construction applications.

材質
Low-carbon steel wire / Galvanized wire / Stainless steel wire
主要仕様
Mesh opening: 1/4 inch to 4 inches
追加仕様
Wire diameter: 0.5–6.0 mm
加工
Available in rolls or flat panels
構造
Black welded wire mesh / Galvanized welded wire mesh
特注製作
仕様・寸法・仕上げをカスタマイズ
用途
Wall plaster reinforcement / Livestock fencing / Equipment protection
Black welded wire meshGalvanized welded wire meshStainless steel welded wire meshWelded wire panelsWall plaster reinforcement

Email: apapmnhh@gmail.com | Share specifications, quantity or drawings for a quotation

製品概要

溶接金網とは?

溶接金網 is a 建築・溶接金網 product supplied in configurations including Black welded wire mesh, Galvanized welded wire mesh, Stainless steel welded wire mesh, Welded wire panels. Flat, firmly welded mesh for farming, separation and construction applications. Selection should confirm Mesh opening: 1/4 inch to 4 inches, Wire diameter: 0.5–6.0 mm, Available in rolls or flat panels together with the installation position and required performance. Available materials include Low-carbon steel wire, Galvanized wire, Stainless steel wire. For Wall plaster reinforcement, Livestock fencing, Equipment protection, Gardening, state whether the product will face moisture, corrosion, outdoor exposure or impact so that aperture, wire diameter, thickness and finish can be matched correctly. For quotation, provide the application, specification, finished dimensions, quantity, lead time and destination. Drawings, samples or site photographs help confirm production, packing and delivery requirements before the order is released.

最終仕様・材質・配送条件は承認済み図面・サンプル・見積書に従います。

構造・材質・製造

溶接金網にはBlack welded wire mesh, Galvanized welded wire mesh, Stainless steel welded wire mesh, Welded wire panelsなどの構成があり、材質にはLow-carbon steel wire, Galvanized wire, Stainless steel wireがあります。最終構成は使用条件・荷重要件・完成寸法に基づき確認してください。Mesh opening: 1/4 inch to 4 inches; Wire diameter: 0.5–6.0 mm。

Weld strength, opening tolerance, flatness and galvanizing route determine welded mesh performance in plastering, cages and guards.

構造Black welded wire mesh / Galvanized welded wire mesh製造溶接パネルとらせん連結線表面仕上げLow-carbon steel wire / Galvanized wire / Stainless steel wire品質確認寸法・溶接・梱包を検査
溶接金網 structure detail溶接金網 application detail

仕様の選び方

まず用途と設置場所を確認し、開口・線径または板厚・完成寸法・材質・仕上げを決めます。Wall plaster reinforcement, Livestock fencing, Equipment protectionなどの用途では、数量・納期・仕向地・図面・サンプルもお知らせください。

技術データ

技術仕様

型式・構造主要仕様材質・仕上げ製品形状・納品主な用途
Black welded wire meshMesh opening: 1/4 inch to 4 inchesLow-carbon steel wireAvailable in rolls or flat panelsWall plaster reinforcement
Galvanized welded wire meshWire diameter: 0.5–6.0 mmGalvanized wire寸法・梱包・数量を注文に基づき確認Livestock fencing
Stainless steel welded wire meshAvailable in rolls or flat panelsStainless steel wire寸法・梱包・数量を注文に基づき確認Equipment protection
Welded wire panelsMesh opening: 1/4 inch to 4 inchesLow-carbon steel wire寸法・梱包・数量を注文に基づき確認Gardening

用途・選定

用途・選定

用途を確認したうえで仕様と材質を決めます。

Wall plaster reinforcement

網目・線径・完成寸法・穴形状から確認します。

Livestock fencing

耐食性・強度・使用条件に合わせて材質と仕上げを選定します。

Equipment protection

正確な見積もりのため用途・数量・納期・図面をお知らせください。

Gardening

工程条件に合わせて仕様・材質・配送を確認します。

施工・梱包・配送

施工・梱包・配送

製造前に承認済み図面・サンプル・見積書に基づき仕様・材質・数量・梱包を確認します。梱包は製品形状と輸送方法に合わせ、輸出では仕向港・積載・必要書類も事前確認します。

  • 承認済みの図面・サンプル・見積書を製造の基準とします。
  • 完成寸法・輸送・荷扱い条件に合わせて梱包します。
  • 仕向港・積載方法・輸出書類を事前に確認します。
溶接金網 packing and delivery

製品比較

溶接金網と類似製品の比較

比較項目溶接金網一般的な代替品選定の注意点
構造・強度Black welded wire mesh / Galvanized welded wire mesh標準構成Confirm against loading and installation
材質・耐久性Low-carbon steel wire / Galvanized wireMaterial matched to conditionsConfirm separately for wet, coastal or corrosive environments
仕様・納品Mesh opening: 1/4 inch to 4 inches / Wire diameter: 0.5–6.0 mm標準寸法・特注図面Quantity, lead time and destination affect the final plan

製品に関する質問

よくある質問

溶接金網の見積もりに必要な情報は?+

用途・開口・線径または厚さ・完成寸法・材質・数量・納期・仕向地をお知らせください。図面やサンプルも参考になります。

溶接金網は図面・サンプルに合わせて製作できますか?+

はい。図面・サンプル・主要寸法を確認したうえで、材質・加工・梱包・配送要件を調整できます。

溶接金網の材質はどう選びますか?+

耐食性・強度・使用条件・予算に合わせて材質を選びます。選択肢にはLow-carbon steel wire, Galvanized wire, Stainless steel wireがあります。

見積もり前にほかに必要な確認は?+

仕様に加え、数量・納期・仕向国または港・梱包要件・輸出書類の要否を確認してください。

技術ガイド

技術ガイド

すべて見る →

溶接金網の仕様・価格のお問い合わせ

We support communication by drawings, samples and project parameters.