READING NOTES
機能から選ぶ
孔径だけで流量、選別、強度は分かりません。ふるいは粒径、通過条件、清掃、吸気ガードは流れ、騒音、防護、装飾は見え方、平面度、曲げ位置を確認します。
加工条件
材質、厚さ、端部を指定し、孔径と板厚が近い場合は加工可否を早期確認します。亜鉛めっき鋼、ステンレス、炭素鋼は腐食、外観、後塗装条件に合わせます。
DECISION TABLE
Confirm the parameters against the project
Start with the application, then carry the required checks into the enquiry.Swipe horizontally on mobile to view the full table| Decision area | What to assess | Confirm in the enquiry |
|---|---|---|
| Application | Screening, ventilation, guarding or decoration | Particle size, airflow or visual density |
| Hole parameters | Hole, pitch, pattern and open area | Sheet size, perforated area and quantity |
| Material and fabrication | Thickness, material, bending and edging | Manufacturability, finish and application fit |
発注
幅長、板厚、孔形状・径、ピッチ、孔領域、数量、曲げや縁処理を記載し、外寸だけ正しい不適合品を防ぎます。
QUOTE CHECKLIST
Prepare for a quote
- Application and safety level
- Total run and segments
- Fence height and opening
- Wire and finish
- Posts, spacing and footing
- Gates, corners and terrain
- Quantity, packing and destination
- Drawings, photos and lead time